If you are looking for portable wireless speakers designed with elegance and class, the GX-BT7 wireless speaker system with dual subwoofers is the ultimate choice. You can use it in your bedroom, study room or home office to give you quality soft sound while you rest, work or do your private study. The GX-BT7 is manufactured by Sharp electronics and is priced at about $149.99. The GX-BT7 is a 2.1 channel Bluetooth speaker system featuring dual active subwoofers and auto sliding speakers. The GX-BT7 allows you to effortlessly stream digital music content via NFC for Bluetooth pairing from your iPod, iPhone, iPad or compatible smartphone.
Full tech specs of the GX-BT7 Wireless Speaker System
2.1 Channel Wireless speaker system
The GX-BT7 is a 2.1 channel Bluetooth Speaker system that is NFC-enabled for Bluetooth pairing. Effortlessly stream your favorite playlist directly from your compatible iPod, iPhone, tablet or Android phone to the GX-BT7.
20W Total Output Power and dual active subwoofer
The GX-BT7 wireless speaker system comprises of two front drivers and two active subwoofers. The amplifier delivers 5W (measured at 10% THD and 1kHz) per channel giving a total of 10W to the front speakers and 10W to the subwoofers or 3.5W(measured at 1% THD and 1kHz) per channel to the front speakers and 8W (measured at 1% THD and 1kHz) to the active subwoofers.
The USB media port supports 2.0 Mass Storage Class and is fully backward compatible with USB 1.1. It supports bulk only and CBI protocol. USB mass storage devices formatted with Microsoft Windows/DOS/FAT12/FAT16/FAT32 are supported. The USB port is also limited on the file formats and bit rates. For MP3, a bit rate of 32-320kbps is supported while for WMA file types a bit rate of 64-160kbps is supported. Additionally, the maximum number of permissible folders on a USB mass storage device is 999 folders including the root directory and a maximum number of 62025 files.
The GX-BT7 has a 3.5mm audio input jack for analogue audio input. It is rated at a sensitivity of 500mV/47k ohms.
Bluetooth and NFC support
The GX-BT7 supports Bluetooth streaming and NFC for one touch pairing with compatible smartphones and tablets. It operates in the 2.400-2.480Ghz band and uses a communication system of Bluetooth specification version 2.1 + Enhanced Data Rate (EDR). It supports A2DP (Advanced Audio Distribution Profile), AVRCP (Audio/Video Remote Control Profile) for audio and video streaming. The GX-BT7 can be paired with a maximum of 8 compatible devices after which it begins to automatically delete, one device at a time in order of pairing as more devices are added to the pairing list.
The GX-BT7 is supplied with 2 free identical NFC tags with a unique ID for the GX-BT7. You can place these anywhere within a 10 meter distance from the wireless speaker system for your convenience. Android 4.1, Jelly bean or higher is supported by default for NFC pairing.
Android device and iPod / iPhone / iPad USB support
The GX-BT7 allows you to connect your smartphone and Android device in accessory mode, using a USB cable, to play your most favorite tunes or digital audio files.
Speaker Sliding Mechanism
When media content is streamed to the GX-BT7, an electromechanical motor is automatically activated that slides the speakers outwards revealing music-synching LED lights. If the system remains idle for more than 60 seconds (for Bluetooth connection) or 20 minutes (for Audio and USB inputs), the GX-BT7 enters idle mode and the speakers slide inwards.
The GX-BT7 is designed with ARNIS 3D sound processing engine that ensures there is no loss in the sense of "stereoness" that results from closely spaced left and right front speakers. This is achieved by expanding the stereo sound to exist outside of the actual speaker position so that you enjoy high quality stereo sound. You can control the stereo widening effect created by this engine from the ESound control button on your remote. It has three modes; MODE1: the default for Stereo expansion OFF and Bass boost ON. MODE2: Stereo Expansion ON and Bass boost ON. MODE OFF: Stereo Expansion OFF and Bass boost OFF.
The GX-BT7 is built as a 2-way speaker system. The front speakers comprise of two 3 ohm, 5cm, Full range drivers while the subwoofers consist of two 6 ohm, 8cm woofers.
The GX-BT7 is rated at AC input 100-240V, 50/60Hz and AC power consumption 21W while active and 0.4W on standby (Bluetooth deactivated).
Unit Dimensions (w x h x d): 17-9/16 x 6-1/8 x 6-1/16. All measurements in inches. Unit Weight: 6 pounds.
If you are looking for portable wireless speakers designed with elegance and class, the GX-BT7 wireless speaker system with dual subwoofers is the ultimate choice. You can use it in your bedroom, study room or home office to give you quality soft sound while you rest, work or do your private study. The GX-BT7 is manufactured by Sharp electronics and is priced at about $149.99. The GX-BT7 is a 2.1 channel Bluetooth speaker system featuring dual active subwoofers and auto sliding speakers. The GX-BT7 allows you to effortlessly stream digital music content via NFC for Bluetooth pairing from your iPod, iPhone, iPad or compatible smartphone.
The USB media port supports 2.0 Mass Storage Class and is fully backward compatible with USB 1.1. It supports bulk only and CBI protocol. USB mass storage devices formatted with Microsoft Windows/DOS/FAT12/FAT16/FAT32 are supported. The USB port is also limited on the file formats and bit rates. For MP3, a bit rate of 32-320kbps is supported while for WMA file types a bit rate of 64-160kbps is supported. Additionally, the maximum number of permissible folders on a USB mass storage device is 999 folders including the root directory and a maximum number of 62025 files.
No comments:
Post a Comment