9.2 Ch. TX-NR929 Onkyo Network AV Receiver

The Onkyo TX-NR929 is a state of the art 9.2 channel Network AV receiver from Onkyo corporation. It is built to impress and will turn a 'big room into a small one'by virtue of its output. It provides an 11 speaker jack configuration for a 9.2 channel output. It can be connected in a 3-zone installation, in which Zone 1 enjoys a 5.1 channel movie, Zone 2, a movie with stereo audio and Zone 3 stereo audio. It provides Infrared, Bluetooth, LAN/WLAN and RS-232 for interconnection with compatible devices for automation.

Attractive features on the TX-NR929 AV Receiver

• HDMI Support for 3D, ARC and CEC HDMI
• Support for Deep Color, x.v.Color, LipSync  
• HDMI Support for DVD-Audio, SACD, Multichannel PCM
• Analog To HDMI Upconversion: (from 480/576i)
• 1080p Upscaling: (Marvell Qdeo)
• 4K (up to 4096 x 2160) Upscaling: (Marvell Qdeo) 
• 4K Passthrough
• Powered Zone2 and Zone3
• Zone 2 Line Out and Zone 2 Video Out
• HDMI Zone 3 Line Out
• iPod Ready: (via optional DS-A5)
• Airplay Ready: (via optional DS-A5)
• Supports Onkyo Remote App: (iPod touch/iPhone and Android-Powered Devices)
• Internet Radio Capable: (Pandora, Spotify, Rhapsody, Sirius/XM, Slacker, last.fm, Aupeo!, TuneIn)
• Streaming Audio From PC / Network: (DLNA, Home Media)
• Streaming Audio Formats Supported: (MP3, WMA, WMA Lossless, FLAC, WAV, Ogg Vorbis, AAC Stereo, Apple Lossless, DSD, LPCM, Dolby TrueHD 
• Wireless Network: (Wi-Fi-Certified) 
• Bluetooth: (Built-in)

 

TX-NR929 Amplifier tech specs

• All Channels: 160 W (6 Ohms, 1 kHz, 0.7%THD, 2 channels driven)
• Front L/R: 160 W (6 Ohms, 1 kHz, 0.7%THD, 2 channels driven) 
• Center: 160 W (6 Ohms, 1 kHz, 0.7%THD, 2 channels driven)
• Surround L/R: 160 W (6 Ohms, 1 kHz, 0.7%THD, 2 channels driven)
• Surround Back L/R: 160 W (6 Ohms, 1 kHz, 0.7%THD, 2 channels driven)
• Dynamic Power: 300 W (3 Ohms, Front), 250 W (4 ohms, 1 Front), 150 W (8 ohms, Front)
• THD+N (Total Harmonic Distortion + Noise): 0.08%THD (20 Hz-20 kHz, Rated Power)
• Damping Factor: 60 (Front, 1 kHz, 8 Ohms)
• Input Sensitivity and Impedance: 200 mV/470 Ohms (Line), 2.5 mV/47 k-ohms (Phono MM)
• Rated RCA Output Level and Impedance: 200 mV/470 Ohms (Line Out)
• Maximum RCA Output Level and Impedance: 4.6 V/470 Ohms (Line Out)
• Phono Overload: 70 mV (MM, 1 kHz, 0.5%THD):
• Frequency Response 5 Hz-100 kHz/+1 dB, -3 dB (Direct Mode)
• Tone Control: ±10 dB, 30 Hz (Bass), ±10 dB, 20 kHz (Treble)
• Signal-to-Noise Ratio: 110 dB (Line, IHF-A), 80 dB (Phono MM, IHF-A)
• Speaker Impedance: 4 Ohms–16 Ohms or 6 Ohms-16 Ohms 9.2 Channels (11 speakers)
• Power Watts/Channel: 135W (8ohms 20-20kHz, 0.08% THD, 2 Channels Driven) 
• THX Certified: Select2 Plus Continuous 6-ohms Rated and Certified 4ohms performance 
• All Discrete Circuitry 3-Stage Inverted Darlington Circuitry: (All Channels) PUSH-PULL Design
• Independent Power Supply Bi-amp Capability For Front 

 

Video and Audio Processing

• DTS Neo:X DTS Decoder
• DTS-HD Master Audio DOLBY Decoder
• True HD, DolbyDigital Plus, Dolby PLIIz 
• ONKYO GAME Surround Modes 
• THX Processing Mode 
• Audyssey DSX 
• Audyssey Dynamic EQ 
• Audyssey Dynamic Volume Music Optimizer: (Advanced) 192K/24 Bit DACs:  (Burr-Brown) 
• isf Certified Calibration Control 

 

Connectivity

• 3/0 in/out Audio 
• 1/0 in/out Phono 
• 3/0 in/out Optical Digital 
• 3/0 in/out Coaxial 
• 5/1 in/out A/V  
• 0/1 Video 
• 2/1 in/out Composite AV connection 
• 1/0 in/out USB 
• 9/2 in/out HDMI 
• I/O VGA - PC Input (15 pin D-sub) 
• 0/9 channel pre-outs 

 

Networking and Integration Access

• IRS-232
• IR Input
• Ethernet
• ONKYO-RI System Control
• 12V Trigger: (Zone 2/3)

 

Video Input Sensitivity/Output Level and Impedance

• 1 Vp-p/75 Ohms (Component)
• 0.7 Vp-p/75 Ohms (Component PB/CB, PR/CR)
• 1 Vp-p/75 Ohms (Composite) Component Video 
• Component Video Frequency Response: 5 Hz–100 MHz, -3dB 

 

Tuning Frequency Range

• FM: 87.5 MHz–107.9 MHz
• AM: 530 kHz–1,710 kHz
• FM/AM Preset Memory: 40 stations

 

Power Supply

• AC input: 120 V, 60 Hz 
• Power Consumption:  9.1 Amps
• A No-Sound Power Consumption: 120 W 
• Standby Power Consumption: 0.1 W 

 

Dimensions and Weight

• 17 1/8" x 7 13/16" x 17
• 1/4" (435 x 198.5 x 437.5 mm)
• 40.8lbs (18.5 kg)

 

Miscellaneous

• Learning Remote
• On Screen Remote Programming
• Activity Based Remote
• Color-Coded Speaker Terminals
• Auto Speaker Calibration
• W/Mic.: (Audyssey MultEQ XT32)
• OSD Out: (Advanced "Home" GUI)
• Solid Aluminum Front