Bowers & Wilkins Z2 Wireless Speaker

The Bowers & Wilkins Z2 wireless speaker not only nicely adorns your coffee table or book shelf with it's aesthetic design and unique curved design but also creates some impressive wallop. It's designed for your iDevices; with its lighting dock compatible with iPhone 5. You can stream and rock this wireless speaker via AirPlay on your smart device. This beautiful tech-lush features two 3.5-inch drivers and a class D amp on the inside, and two capacitive volume pads, an Ethernet port and a 3.5mm headphone jack on the outside - catering for all your connectivity needs.
Bowers & Wilkins Z2-C4-Wireless Speaker
Full article coming up soon...
Read More

D-Link Pan & Tilt HD Cloud Wi-Fi Baby Camera - DCS-855L

If you are a busy or working mom or Dad, the DCS-855L Wi-Fi Baby Camera can help you keep an eye on your little one. The DCS-855L is a portable Wi-Fi camera that allows you monitor your toddler remotely or directly on your smartphone using a freely available and easy to use mydlink baby app on Apple and Google Play stores. You can install the camera in the nursery or baby play area to keep an eye on your toddler while you finish up with other tasks. The DCS-855L Wi-Fi Baby camera comes with a pan and tilt feature that lets you move the camera remotely, so you can monitor the entire playroom from your smartphone.

D-Link Pan & Tilt HD Cloud Wi-Fi Baby Camera - DCS-855L

This camera gives you several flexible connectivity options. First, you may pair your smartphone directly with your DCS-855L camera via WiFi. Secondly, If you are have a WiFi router in your home, you can connect your smartphone via the WiFi router. And lastly, through the Internet when you are at work, so you can check on your infant no matter where you are. While it does give you the ability to remotely watch your baby or child, there should always be an adult in the same house. The Wi-Fi Baby Camera should only be used as a parenting tool for monitoring your toddler and not a replacement for adult supervision.

Because the DCS-855L camera is portable you can carry it on your travels with your baby and all you need is a mobile device to connect directly to the Wi-Fi Baby Camera.


Attractive features of the D-Link HD Cloud Wi-Fi Baby Camera - DCS-855L


  • Motion detection

The DCS-855L Wi-Fi Baby Camera has embedded software with algorithms that continuously analyze video footage for motion. And when motion is detected, notifications are sent out to your smart device.

  • Sound sensor

A tiny microphone is embedded into the DCS-855L Wi-Fi Baby Camera to pickup ambient sound. This allows to record or listen to sound from your toddler's surroundings. The sensitivity of this microphone can be adjusted so as to achieve desired clarity level.

  • Temperature monitoring

The DCS-855L Wi-Fi Baby Camera has a small temperature probe to measure ambient temperature. Knowing the surrounding air temperature, you are able to determine the level of comfort for your baby and take the appropriate action.
   
  • Night vision

Several tiny Infrared (IR) LEDs are fitted around the focus ring of the DCS-855L Wi-Fi Baby Camera to illuminate the camera's field of view. This allows the camera to capture clear images of up to a distance of 16 feet or 5 meters.

  • Capture snapshots and record videos

The DCS-855L WiFi Baby Camera has a micro SD card slot that supports microSDHC Class 6 cards and above with maximum capacities of 32 GB. This allows you to record event-triggered Snapshots and Video recording.

  • Play gentle lullabies 

Sometimes, easing your baby to sleep can be a nightmare especially for hyper active ones. But the DCS-855L baby camera has got what it takes to help ease your baby to sleep! It has an built-in speaker that allows you to remotely speak to your child or playback gentle lullabies to ease your child to sleep.

  • Remote Management

The DCS-855L allows to remotely, take snapshots, record video clips and save directly to your smartphone
or tablet. Additionally, you can connect manage the DCS-855L remotely from web browser since it supports TCP/IP and HTTP/HTTPS. Better still, using mydlink baby app, you can connect directly to the DCS-855L with your smart device.

  • mydlink baby app

Mydlink Baby Camera Monitor App is freely available for iOS and Android Mobile Devices on Apple Store and Google Play. By creating an account on on the D-link server, you are able to securely ,monitor your child remotely from anywhere for free using mydlink baby app
 

Full tech specs of the DCS-855L HD Cloud Wi-Fi Baby Camera

  • 1/4 inch Megapixel Progressive CMOS Sensor

At the core of the DCS-855L Baby Camera function is a very compact 1/4" Megapixel CMOS progressive scan sensor which produces a realistic and smooth video. The CMOS sensor is capable of video resolutions of 1280 x 720 and 640 x 352.   

  • Tilt and Pan Ranges

In digital photography, Tilt and Pan ranges refer to rotations in the vertical and horizontal plane of a camera. For the DCS-855L Baby Camera, the Tilt range is from -25° to 95°, while the Pan range is from -170° to 170°.

  • Focal length, Aperture and Digital Zoom 

The focal length normally of a lens camera gives you a description of the lens adopted. It's a lens' measure of how it effectively converges light to a focus. While its aperture denotes the size of an opening or hole that allows light from the objects being imaged to the CMOS image sensor. In the DCS-855L a lens of 3.3 mm is used with an aperture of F/2.2.

  • Angle of View  

The Angle of View (AOV) of any camera is the angular measure that an object being imaged subtends at its image sensor. Sometimes Angle of View is also referred to as Field of View (FOV). The Angle of View is measured vertically (V), horizontally (H) and diagonally (D). For the DCS-855L field of view is restricted to 70.4° horizontally, 43° vertically and 84.6° diagonally.

  • Infrared IR LEDs

The IR LEDs that support night vision have a maximum illumination distance of 16 feet or 5 meters with a minimum illumination of 0 lux with IR LEDs are On. Additionally, it has an embedded Infrared-Cut Removable (ICR) Filter.

  • Built-in Microphone and Speaker

The built-in microphone is for recording and capturing audio from your child's environment while the speaker allows to speak to your child remotely.

  • Alerts and Notifications

The Camera sends out alerts or notifications to your mobile device upon detection of sound and/or motion.

  • Supported Network Protocols

The DCS-855L Baby Camera supports IPv4, ARP, TCP/IP, UDP, ICMP, DHCP Client, NTP Client (D-Link), DNS Client, DDNS Client (D-Link), HTTP, HTTPS (for Configuration), UPnP Port Forwarding and RTP/RTSP/RTCP.

  • Input/Output Ports

The DCS-855L Camera has two ports; a micro USB power port and a microSD card slot. The microSD card slot supports microSDHC Class 6 cards up to a maximum capacity of 32 GB.

  • Video features

The DCS-855L Baby Camera supports video resolutions of 1280 x 720 and 640 x 352. While codecs H.264 and JPEG are supported for video format and still Images respectively.

  • DCS-855L Weight and Dimensions

This Camera measures approximately 4.5 inches x 4.3 inches x 5.2 inches (114.16 mm x 109.16 mm x 131.3 mm) and weighs a net of 14 oz or 396 g.

  • Power Requirements

The DCS-855L Camera uses an external power adapter with Input 100 -240V AC, 50/60Hz (of micro USB type) and with an output of 5V DC, 2 A. Alternatively, you can use an external USB power bank to power your camera. It's total power consumption is about 7.5 W.

  • Operating Temperature and Humidity

This Baby Camera is very robust. It operates between 32° and 104°F (0° to 40°C) and humidity levels between 20 and 80% RH Non-condensing.
  • DCS-855L Pricing
The price for this baby camera varies between $203 to $249.99 depending on where you buy it from.
Read More

Philips LivingColors Aura White LED- MyLiving Table Lamp

Philips LivingColors Aura White LED Table LampPhilips LivingColors Aura is similar in construction and application to the LivingColors Bloom White. The two table lamps have been designed intuitively to give you the best ambiance and mood lighting experience. With up to 16 million colors to choose from, your creativity is never limited! The Aura White LED Lamp features light changing LEDs with a maximum light output of 120 lumens and a flawless diffused color effect.


This LivingColors Aura surprisingly adopts a single bulb (LED lamp) of 8 Watts, built by combining a number of light changing LEDs together. The LED lamp custom built to produce 120 lumens of light output. The Lamp has a characteristically large beam angle of 120 degrees and thus, beaming it towards a light colored wall gives you the best ambiance with a natural diffused light effect.

The Aura LED lamp is compatible with low voltage dimmer switches commercially available on market. Additionally, it is supplied with a remote control for easy use and operation. The remote has a color wheel which you can turn clockwise or anticlockwise to select from the 16 million colors available for your preferred mood lighting. The remote also has an auto mode which changes the mood lighting colors dynamically.


Design specs of the Philips LivingColors Aura Table Lamp - 709986048 

  • Design and finishing

Philips LivingColors Aura White LED Table Lamp - back ambience viewThe innovative LivingColors Aura White Table lamp comprises of a powerful single bulb built by combining several light changing LEDs. The bulb is a housed in a solid proof white aluminium chassis. 

  • Power Requirements

The Aura LED lamp power adapter requires 120 V, 60 Hz AC input power while the bulb runs on 18 V D.C power input. Your power adapter AC input will vary depending on your local grid. For US, it is rated at : 120 V, 60 Hz Mains Power supply. While for models meant for Africa/ middle East, South America and Europe, that power rating is 230 V, 50Hz. 

  • Philips LivingColors Aura White Lamp Wattage

Inside the Aura White table lamp, a LED lamp (bulb) of 8 W is fitted and gives off a maximum light output of 120 lumens.

  • Philips LivingColors Aura Operational life

The LEDs used to build the Aura LED lamp have a finite lifetime of 20,000 hrs. This is long enough to last you about 20 years if your daily usage averages at 3 hours. That notwithstanding, the LEDs have a  threshold of 13,000 on/off switching cycles, which makes the lamp more resilient during its operational life. What's more the aluminium chassis of the Philips LivingColors Aura LED Table lamp is designed to be ingression proof to dust, wires and other solids. So, this gives extra protection and consequently longer life.

  • LivingColors Aura Table Lamp dimensions and weight

LivingColors Aura table Lamp is a lightweight product measuring 5.9 inches along its height, 6.5 inches on its length and 8.7 inches along its width. It has a net weight of 1.299 lb.

  • LivingColors Aura Lamp Application

It is designed to create a perfect ambiance with light in your Living room, kids room or Bedroom.

  • Initial Pricing

The LivingColors Aura LED Table Lamp costs about $116.

Read More

Philips Altena LED - MyLiving Ceiling Light fixture

Just like the Ledino Matrix, the Altena Aluminium LED Ceiling lamp presents you with an inspiring classic look for your modern bedroom and living room space. It presents a modern ceiling light fixture in a slim metallic arc. The Altena Aluminium LED Ceiling light is built from three (3) High Power LED lamps that are housed in a metallic chassis with an elegant aluminium finish. The High Power LED lamps are specially crafted to a synthetic and aluminium housing to produce an optimal light output with a 100% uniform light color.
Philips MyLiving Ceiling Light - Altena Aluminum LED lampThese High Power LED lamps are able to give you a warm white light effect with color temperatures reaching 2700 Kelvin.

The Altena LED lamp also gives you ability to control your lamp's light output using low voltage electronic dimmer switches commercially available on market today. This allows you to showcase your taste and lifestyle while creating ambiance with light and energy efficiency.

The High Power LEDs from which the Altena Aluminium LED lamps are made are maintenance free; with a factory estimate of 13,000 on/off switching cycles, and an incredibly long operational life estimated at 20,000 hours. If we take an average daily usage of 3 -6 hours, this lamp would last you anywhere between 10 - 20 years.

Design specs of the Altena Aluminium LED Ceiling Light - 37946/48/48

  • Design and finishing

The Altena Aluminium LED Lamp fixture is made up of three High Power LED lamps housed in a metallic chassis with an aluminium top finish to give the light fixture a stylish and modern look. It's flexible design allows you to integrate an electronic dimmer switch control its light output.

  • Power Requirements

The Altena Aluminium LED Ceiling light fixture requires; 110 V - 127 V, 60 Hz AC input for US models, while for models meant for Africa/middle East, South America and Europe, that power rating is 220 V - 240 V, 50/60Hz AC input. Please note that the power requirement of the Altena LED Lamp will depend on your  local power grid.
The Altena LED Lamp is generally safe to handle and operate even during fault conditions. The fixture is built with a Safety Extra Low Voltage (SELV) - implying that in the event of a single fault, the voltages generally remain at safe level, and therefore pose no threat of injury.

  • Fixture Wattage

The High Power LED Lamps in the Altena Aluminium LED light fixture are built using LED technology with efficiencies of nearly 100 lumens per Watt (W). Each fixture is rated at 7.5 W with a beam angle of 35 degrees. It gives off a light output equivalent to a light source  equivalent to a traditional bulb of 56 W.

  • Altena Aluminium LED light fixture Operational life

Each lamp in this light fixture, has a finite lifetime of up to 20,000 hrs. This is long enough to last you 10 years with an average daily use of 6 hours each day. Additionally, the LED lamps have a threshold of 13,000 on/off switching cycles, which gives you more resilience than you will ever need during the operational life of the light fixture. What's more, the housing of the lamps has been designed to be ingression proof to all solids, except liquids.

  • Tunable white

The Altena Aluminium LED lamp introduces a new feature called "Tunable White". With this feature you are able to choose your preferred light color from four (4) standard options available, that is, from warm white to cool white. You can do this using a simple tool that is included with your luminaire. 

  • Altena LED Lamp dimensions and weight

This is light fixture is a slim stylish arc measuring 2.0 inches on its height, 22.9 inches on its length and 7.9 inches on its breadth. It weighs a net weight of 8.598 lb.
  • Application of the Altena Aluminium LED Light fixture

It is designed to be fitted in a modern Living room and Bedroom space.
  • Pricing

The Altena LED Light fixture has been initially priced at $539.
Read More

A look at the Indesit XWD-61452 Washing Machine

6.0 kg Front Loader Indesit XWD 61452 Washing Machine
The Indesit XWD-61452 Washing Machine is a free standing energy efficient front loader washer with a full load capacity of 6.0 kgs and maximum spin speed of 1400 RPM. It is sold in ceramic white. It features, dial knob programme controls with a convenient Push & Wash button that starts a wash cycle even when the machine is "cold" or off.

Attractive Features of the Indesit XWD-61452 Washing Machine

This washer machine has a number of attributes that make it particularly suitable for its function and include the following;

  • Sport

By pressing this button you are able to select the most suitable programme for your sports clothing, and is designed to remove dirt while preserving fabric properties. This option presents you with three levels of wash cycle customization;
- Sport Shoes, a wash cycle designed to safely wash up to 2 pairs of sports shoes in one go.
- Gym Kit, a wash cycle designed for washing any type of sports clothing together with gym towels.
- Technical Wear, a wash cycle designed for washing waterproof garments or clothing with special fibres like
Gore-Tex, etc. It optimises washing performance and preserves fabric technical properties over time. Fabric softeners are not advised for technical wear.

  • Easy Iron

The Easy Iron function modifies the wash and spin cycles in such a way that crease formation is greatly reduced. In effect, what your Indesit XWD-61452 does, is to reduce the speed of rotation of the drum towards the end of the wash cycle.

  • Extra Rinse

When you select this option, your washer's rinsing efficiency is increased and more detergent is removed from your laundry. This is particularly applicable for garments with sensitive skin.

  • Fast Forward

The Fast Forward function allows you to end the wash cycle in less than the select programme time. Pressing this button ends the wash programme in only 20 minutes. In effect, the machine performs a brief rinse cycle followed by a spin cycle at maximum 800 rpm or lower. You should note that the Fast Forward function reduces the washing and rinsing performance.

Tech specs of the Indesit XWD-61452 Washing Machine

  • Water inlet hose pressure

You should connect your washing machine to a water inlet that delivers water at a pressure within the range of 0.5 bars to 10 bars for optimum performance.

  • Dimensions

This washing machine measures approximately 59.5 cm on its width, 85 cm on its height and 54 cm on its depth.

  • Load and Drum Capacity

The lowest garment load this washing machine can take is 1 kg, while at full load; it takes a maximum of 6 kgs of garment load. Its drum capacity is rated 52 litres of water.

  • Spin speed

You can vary the Spin speed from 0 up to a maximum of 1400 Rotations Per Minute (RPM) using the spin speed knob. The zero (0) corresponds to the delicate wash cycle in which the spin cycle is turned off, while 1400 is for extremely soiled cotton fabric wash cycles.

  • Power Requirements

    • Power input

The Indesit XWD-61452 takes in AC 220-240V, at 50/60Hz. Be sure to check the nameplate as this will always differ depending on your region.

    • Power Consumption in operational mode

The Indesit XWD-61452 Washing Machine is an A++ class machine according to the EU power rating labels. The rating tests are carried out on Cotton Standard 60° (Programme 8) and Cotton Standard 40° (Programme 9) and conform to the 1061/2010 directive. Programme 8 and 9 are for normally soiled cotton laundry; they give you the most energy efficient and minimal water consumption. Accordingly, this Indesit XWD-61452 uses approximately 172 kWh of electricity per year. These values are subject to change depending on how you use the machine.

    • Power consumption in off-mode 

This washing machine still consumes power when in off-mode; approximately 0.5W. Therefore, you should always power off the mains from the wall socket when you are done with your laundry.

    • Power consumption in on-mode

To cut on your power bills, never leave your Indesit XWD-61452 powered on. In the on-mode, it consumes about 8.0W. It might seem insignificant, but if on average, you leave your washing machine on for an hour each week, in a year that adds up to approximately half a unit. And from my experience, if there are more people handling the machine, the more likely it is to be left on. On the other hand, the washer has mechanism that turns it off after 30 minutes if left without any load.

  • Water Consumption

Basing on 220 standard washing cycles for cotton programmes 8 and 9, at 60 and 40 degrees temperature at full and partial load, the Indesit XWD-61452 washing machine approximately uses up 8376 liters of water in one year. You should note that this is just an estimation, actual water consumption can vary depending on which programmes you use.

  • Spinning and Washing Noise level 

We all detest noisy washing machines. Thankfully, the Indesit XWD-61452 is not one of them! The washing cycle produces low humming noise about 59dm noise level. It becomes slightly noisy for spinning cycles giving out 81dm of noise. for is quiet during its washing and spinning phases. smelly washing machine.

  • Spin-drying efficiency

Spin drying efficiency is measured on a scale from G to A; where G denotes minimum efficiency and A maximum efficiency. Basing on this scale, the Indesit XWD-61452, scores a class B efficiency. Residual moisture content for programmes 8 and 9 is estimated at 53%.

How Cleaning Washing Machine regularly will prevent bad odours

If your washing machine smells, just know cleaning is long over due. You should make it a habit to clean your washing machine regularly; preferably once in every three months. That way you will stave off any bad smells and keep your laundry smelling ever fresh. The cleaning tips presented here much as have been used on an Indesit XWD-61452 washer, very much apply to any front loader washing machine since they change very little from manufacturer to manufacturer.

Causes of bad smells in a Washing Machine

If your washing machine smells, just know there is an accumulation of any of the following;

  • Scum

Scum will always be a problem if your washing machine uses hard water. Hard water naturally contains dissolved magnesium and calcium salts that make it difficult to foam lather with ordinary soap and react with detergents and soap to give a froth called scum (chemically called stearate) during the washing cycles. Sometimes, during the rinsing and draining process this scum is not completely washed away and gets stuck onto the drum, and rubber seals. Due to dampness, the scum presents a good breeding ground for microbes to grow in a process known as fermentation. The fermentation process creates bad smell in your washing machine.

  • mildew and molds

Mildew and Molds are fungi plants that thrive in moist conditions. If your washer machine has residual dirt, scum or detergent inside the drum, and is not allowed to dry fully by leaving the porthole door ajar for some time, then mildew and molds will sprout and hence the bad odors.

  • Residual bleach, soap and detergent

Sometimes, you may run your XWD-61452 washer without performing the rinsing process. This leaves some residual soap and detergent inside the machine. This over time begins to ferment giving off a bad odour.

  • Residual dyes from coloured garments 

There are certain fabrics that are delicate to washing with your washer machine because they give off a residual dye. Such clothes include most Jean clothing. During the wash cycles, this clothing leaves a residual dyes and once mixed with detergent over time give off a bad odour.

  • Clothing with Bad Odour 

Sometimes you may use your washer to wash clothes that have been 'stained with bad odour' from say sweat, smoking and fried foods, baby poop, urea, etc. By not using a proper rinse for such clothing, these odours remain in the machine and if the drum is not allowed to dry after the wash, a foul smell results.

How to clean Your Washing machine


Your Indesit XWD-61452 washing machine has an internal Auto Clean programme for automatically cleaning the internals with no load in the drum.
  1. Add vinegar to the detergent compartment in the detergent dispenser and fill to the mark. [Do not exceed the mark]. Vinegar comprises of mainly acetic acid that dissolves all the dirt, scum and mildew inside the drum of your washer.
  2. Add caustic soda to the fabric softener compartment.
  3. Press the "Fast Forward" and "Easy Iron" Buttons simultaneously for 5 seconds to start the Auto Clean cycle. The Auto clean Cycle will last approximately 70 minutes. You may interrupt the Auto Clean cycle by pressing the START/PAUSE button.
  4. When the Auto Clean programme is completed cut off the water and electricity supplies.
  5. Clean outer parts and rubber seals of the washing machine using a soft cloth or sponge soaked in lukewarm soapy water. Do not use abrasives and solvents as they will degrade the aesthetics of the washing machine.
  6. Remove the detergent dispenser drawer and thoroughly clean it using a sponge soaked in lukewarm soapy water and rinse it thoroughly under running water. An old toothbrush can be handy in removing "stubborn" stains. To remove your Indesit XWD-61452 detergent dispenser drawer, locate the lever latch inside the drawer. Press the lever downwards and pull the drawer outwards.
  7. Locate and clean the your washers pump pre-chamber. Your washing machine is fitted with a selfcleaning pump but sometimes, small items (such as coins or buttons) may fall into the protective
    pre-chamber at the base of the pump and have to be cleaned out from time to time. To access the pre-chamber: Locate the cover panel at the base of the front face of your Indesit XWD-61452. Using both hands press it in the centre from either side while pushing it downwards until you can remove it. Upon removing the cover, you will see a lid, turn it anticlockwise to access the pre-chamber. Clean the inside thoroughly, screw the lid back on and reposition the cover panel, while ensuring the hooks are properly aligned to your washer.
Read More
Blogging Fusion Blog Directory
BlogrollCenter.Com
Blog Directory & Business Pages - OnToplist.com